logo

Wifi Box


The WIFI BOX allows inverter data to be sent through wireless networks (internet connection is required) via either AP mode (access point) or STA mode (station) such that users can monitor their system anywhere on any devices that support browser.  All data is displayed and stored on a Cloud service website “Power Data Center” and users simply need to register a free account and login to access inverter data.  A single WIFI BOX can support multiple-unit monitoring in a parallel “off-grid” or entry-level Hybrid V/V2 parallel system.  However if your inverter model is “MPI hybrid“, then you will require one for each unit of hybrid inverter in parallel.

WIFI BOX will also self-update latest firmware automatically.   Email notification is also supported when new events appear.

12V/1A POWER ADAPTOR

To ensure steady performance of device it is recommended to use a 12V/1A power adaptor (not included) for this wifi module.  It is a common specification and can be sourced in most electronics store.

While WIFI card/box is widely compatible with most of our off-grid and hybrid inverters, some models are still untested and should be recognized as “incompatible” at the moment.

IMPORTANT: the following models are NOT supported at this time
  • MPI 12K / 15K WP
  • HV6048 WP
  • HV 3P 6K/9K

For more information, please refer to user manual:

Date: February 01, 2018
Language

MPP Solar Store is now ready.

X