PIP-HS Series

PIP-HS SERIES

• OVERVIEW
• FEATURES
• CATALOGS
• VIDEO
• MONITORING

• The PIP-HS series is a versatile high frequency Pure Sine Wave inverter-charger designed for both off-grid or with grid (as backup) application. This series features a light weight and compact design, contains a 50A max PWM solar charger, as well a utility charger ranging from 20A to 60A.  The 48v models feature a dual source charging capability (AC + Solar) and the maximum system charging current range from max 50A for 12 and 24v models, up to 110A for 48v models.

  PIP-HS features a wide input range support from 90~280VAC (Appliance Mode) and 170~280V (UPS Mode). This is especially important and useful for areas with unstable grid power supply. Similar to our other series of solar inverter-charger, PIP-HS also offers AC or DC (solar) priority modes, and the controls can be easily modified from LCD menu that offers comprehensive system information. It also comes with a USB port that can be connected to a PC for system monitoring.  When selected to operate in DC (solar) priority mode, inverter will increase charging current from Solar source whenever possible, while reducing current from utility sources.

  “Stackable” or “parallel-ready” version is available on select 48v models only and allows users to expand output of an inverter system by integrating the output circuits of all paralleled units.  Maximum parallel number of units is 6, so users can configure a parallel system either as:

  • Single phase output up to 24kw using 6 units, OR
  • Three phase output using either 3 units (12kw) or max 6 units (24kw)

  For more information, please download the catalogs at the tab page above or contact our sales office at sales@mppsolar.com.

• • NEW! PIP-1212HS (1.2kw, 12vdc) available now
    
  • High frequency pure sine wave output, light-weight design
  • Programmable modes on LCD, e.g. AC priority vs. Solar(DC) priority
  • Adjustable Bulk/Float charging voltage
  • Support lead acid and LiFePo4 batteries
  • Support 1-phase or 3-phase PARALLEL output up to 6 units (48v models only, require parallel kit to work)
  • Indoor installation only
  • Built-in solar charger (max 50A)
  • 3-stage battery charger (max 60A on 48v models only)
  • total max charging current 50A + 60A = 110A! (on 48v models only)
  • 2x surge capacity
  • Wide AC input ranges
  • LCD + LED indicators
  • FREE monitoring software
  • Built-in generator starter dry-contact

  Using Generator as AC-Input

  • Generator size should be sized at least 150% larger than the inverter rating to reduce chances of overload.
  • Inverter-generator is recommended due to its cleaner output than conventional generators.  Unsuitable generator output may be rejected by the inverter.

• • PIP-HS Series Catalog PDF
  • PIP-MS Parallel Guide
  • Generator Requirement

• ---
• • WatchPower User Manual

  **For WatchPower software please contact our Sales team sales@mppsolar.com directly.